MB-W70-PEWhite Masterbatches
Rutile White Masterbatch
High Opacity & Dispersion for Blown Film & Injection Moulding
- Active TiO₂
- 70%
- Specific Gravity
- 2.05
- MFI
- 12.0 g/10 min
- FPV
- < 0.8 bar/g
Injection · Blow Moulding
Masterbatch for Injection & Blow Moulding
Moulders need consistent color shot after shot and cycle times that don't creep. Our white, color and filler grades disperse cleanly at short residence times, and CaCO₃ compounds help parts cool faster in the mould.
- Caps & closures
- Crates & rigid containers
- Blow-moulded bottles
- Household plastics
- Housewares
What We Solve
The problems our grades are built for.
- 01
Shade consistency
Custom colors are spectrophotometer verified to Delta-E < 0.5 against your standard.
- 02
Heat history
Pigment systems are chosen for heat stability from 240°C up to 300°C.
- 03
Cycle time
CaCO₃ at 10% – 35% raises thermal conductivity and accelerates mould cooling.
- 04
Opacity in thin walls
MB-W70-PE at 1.0% – 2.5% gives full whiteness in caps, closures and crates.
Recommended Grades & Dosage
What to run, and how much.
Let-down and addition levels are quoted from the grade TDS. Your final dosage depends on gauge, wall thickness and target properties; the let-down ratio calculator works out masterbatch and resin quantities for a batch.
GradeApplicationDosageNote
- MB-W70-PE
70% Rutile White
Injection moulded parts (caps, closures, crates)
1.0% – 2.5%
—
- CP-CA80-PE
80% Calcium Compound
Injection moulding / housewares
10% – 35%
Accelerates mould cycle cooling
- MB-CLR-CUSTOM
Custom RAL / Pantone
Closures, containers & household colors
To brief
Universal / PE / PP carriers
Processing notes
- MB-W70-PE is compatible with LDPE, LLDPE, HDPE and PP copolymers.
- Share part drawings or a reference part and we match color, opacity and carrier together.
CP-CA80-PECalcium & Filler Compounds
Calcium Carbonate (CaCO₃) Compound
Micro-Coated Filler Compound for Blown Film & Injection Cost Optimization
- CaCO₃ Content
- 80%
- Particle Size (D50)
- 1.5 μm
- Coating
- Stearic acid
- Whiteness
- ≥ 95.0
FAQ
Questions about masterbatch for moulding.
Which masterbatch suits injection molding of caps and closures?
For white parts, MB-W70-PE at 1.0% – 2.5% gives full whiteness in caps, closures and crates, and is compatible with LDPE, LLDPE, HDPE and PP copolymers. For colored parts, custom color masterbatch on universal, PE or PP carriers is verified by spectrophotometer to Delta-E < 0.5 against your standard.
Which masterbatch is used for blow moulded HDPE bottles?
Custom color masterbatch matched to your shade, and MB-W70-PE for white HDPE containers.
Does CaCO₃ filler help moulding cycle times?
Yes. Calcium carbonate raises thermal conductivity, so filled parts cool faster in the mould. CP-CA80-PE is used at 10% – 35% in injection moulding and housewares.
Will the color hold up to my processing temperature?
Pigment systems are chosen for heat stability from 240°C up to 300°C. Share part drawings or a reference part and we match color, opacity and carrier together.
Free Sample
Running moulding? Get a sample matched to your line.
Send your polymer, process and target let-down. Our Rajkot lab confirms the grade and dispatches a sample or a 5 – 25 kg trial lot.